Rough camping – Carthaginian Field Camp for Field Of Glory/DBX in 15mm Part II

Last time we built up the ground work and vegetation, added the tents and some first details such as fireplaces, the lean-to and shields covered by a tarp.

Now it is time to add more details and the miniatures to populate the camp. We will add two scenes: A Numidian and an Iberian playing a game of dice, while the fish their servant caught earlier in a nearby river is sizzling over the wood fire. At the same time a Libyan veteran is eating his porridge / puls seated in front of the fireplace.

We add further food items, such as bread and olives (all made by the talented Syl from ThePaintedRogue), ceramic jars, a basket, a coat for the Numidian to rest on, some leather pouches, where food and dice are contained in, the actual dice, a stack of firewood and finally a cooking tripod complete with a small situla (cooking pot).

This tutorial and the techniques covered are not only useful for a camp scene, but can be easily adapted for any of your projects and might also prove useful for bigger scales such as 28mm.

Historical considerations

When I was thinking about what details to add, a makeshift tripod with a situla attached came to mind first. A tripod, while surely not standard amongst the soldiers on campaign, would have made the preparation of food easier, as it allows to regulate the heat. Wood seemed a reasonable material, as it is easy to procure and can also be replaced easily if need be. The situla was widely used throughout the mediterranean and shapes and forms of these pots differed widely, with rich archaeological evidence to guide us in sculpting a pot. I decided to make a very simple rectangular pot with a handle looped through two suspension rings. While very ornate situlae did exist, it is unlikely that simple soldiers would have invested in this. The situla was often made out of bronze.

The food items on display should not be too fancy and easy to procure or transport when on campaign. Especially taking into account the supply situation during the invasion of Italy.

Bread was a staple of the mediterranean diet even on campaign. Being issued with a certain amount of wheat (see Plb. 6.39 for the amount of wheat issued to roman soldiers and Liv. 27.1 for the amount of wheat found as booty after a Carthaginian garrison in Italy had been defeated) soldiers were able to eat it as a sort of porridge (puls or pulmentum), mixed with water. If any legume were available onions, carrots or other vegetables could be added to refine what was basically wheat pulp.

Someday, Hasdrubal reflected as his spoon hovered over his dinner, Matho would learn to make a less snotty-textured pulmentum. Alas, today was not that day.

The wheat was issued and carried as grain, mainly to preserve it better while on campaign. A small hand-mill would have likely been carried by each contubernium with a servant preparing the flour. We have some examples of carbonised  flat breads found in Pompei (see the British Museum webpage for a recipe and picture), so I decided to add one of these. On campaign one could use a clibanus (pottery in the shape of a bell) or a similar device to make bread. It is put on top of the shaped dough, which is then placed over a fire. With the help of the developing steam the bread rises slightly while being baked (see the website of the AERA of a reconstruction of roman bread making). Given these resources refer to the imperial roman army, we cannot transfer this without allowing for some differences. Nevertheless, if it comes to simple fare like bread and wheat pulp it is likely that Carthaginians ate similar than their Roman contemporaries on campaign. Especially so in Italy, when they foraged the same areas and had access to local merchants.

Beef or fish would not have been an often encountered food on campaign, as it is not easy to preserve, but surely in a more permanent camp cattle would have been kept to supplement the daily fare of soldiers. The fish might be a special treat, but if a river was close to the camp a foraging party could have caught some. Iberia, or more precisely Turdetania, was also famous for its salted-fish exports (Strab. 3.2.6) making it also feasible that salted fish was taken on campaign.

Palms sweaty, buttocks clenched, Bagarok prepared to cast the crucial roll that would decide whether he dined on Micipsa’s tasty bread and olives, or joined Hasdrubal for a bowl of goo…

Olives were as plentiful in Iberia (Strab. 3.2.6) as they were in Italy. They could be easily preserved and their oil was a staple in the mediterranean world. It is thus not unlikely that some preserved olives were taken on campaign in amphorae and replenished locally.

The first dice that were handed down to us are thousands of years old and ancient people were quite fond of gambling. They were often made of bone or talus of hoofed animals. It is thus very likely that soldiers took some on campaign to pass time with or without the approval of their superiors.

Finally the pottery for the camp is a mixture of quite different styles. I chose two neck amphorae from the Baueda set, one similar to the narrow types used to store oil or wine, the other with a wider belly which could keep liquids and preserved foodstuff. There is also a version without handles, which could also hold various foodstuff or might just contain water. On campaign a mixing of styles is quite likely, as broken pottery would need to be replaced locally or might have been acquired as  booty. I also made use of one of the baskets filled with fruit. It could well be apples, if we assume a nearby orchard was plundered.

The camp element in its final shape. The shields can be removed, so that I can replace them with thureoi if I need to.

What you need

For the tripod:

• Thin wire to depict the three legs.
• Copper wire to depict rope.
• Acrylic gel mat to cover the wire.
• Wood filler to give the wire a wood texture.
• Brown acrylic paint and brown wash (e. g. Vallejo Umbra Wash) to paint and weather the frame.
• Super glue.

For the pile of fire wood:

• Thin wire to depict the wood logs.
• Copper wire to depict rope holding the logs in place.

For the situla:

• A piece of thin aluminium foil. I used a piece you can often find sealing a can of instant coffee.
• Fimo of any colour.
• Copper wire to form the suspension rings and handle.
• Bronze acrylic paint and some black pigment to depict sud.
• Acrylic gel gloss mixed with beige acrylic paint and some very fine sand to depict the wheat pulp cooking in the pot.

For further detailing:

• A variety of amphorae, baskets, vessels etc. to add interest. You can use the superb 15mm Baudea set of ancient supplies or sculpt these items yourself.
• Shields of various kinds.
• A selection of miniatures, depending on what scenes you would like to depict.
• Some fimo and a bit of the “wheat pulp” paste to fashion a bowl and a spoon for one of the converted miniatures.
• Some animals from the Busch Kleintierset (optional).
• Greenstuff  to depict a blanket.
• Two very small pieces of metal to depict the dice. You can cut those from flash.
• Miniature food items. Either get casts in metal or resin or try your hand at Fimo miniature food. If you sculpt it yourself you need Fimo in different shades (green, brown, off-white) and a set of pastels to shade it before you bake it. In using already coloured Fimo and pastels you not only save yourself some time this way, but you also achieve much more subtle transitions and a more realistic end result.

How you do it – Finishing touches:

The tripod and the pile of fire wood:

1. Cut the wire for the logs and tripod to size and shape it until you are happy. I used four pieces for the tripod: Two single strands of wire for two legs and two twisted ones for the third, forming a fork at its top. For the pile of fire wood I used about twelve short pieces.
2. Drill holes in the base where you want the tripod. Make sure the tripod looks convincing when in place.
3. Apply acrylic gel mat to the wires to increase adhesion of paint and wood filler. It is a good idea to stick one end of the wires in styrofoam, apply the gel and turn them around after it is dry to cover the remaining tip. Let fully dry.
4. Apply woodfiller with a bit of PVA and brown paint mixed in just like the acrylic gel.
5. Apply a brown wash to the “wood” parts.
6. Using some super glue fix the tripod in place over the fireplace. Do not glue the legs to the ground yet, just fixate the top.
7. Wrap one strand of copper wire around the meeting point of all three legs to depict rope. It is advisable to paint the wire before you wrap it around.
8. Use some more copper wire to depict fastening ropes around the fire wood. I did not make them go all around because it would lift the pile off the ground.

Situla:

1. Using a thin rod as a template (the hilt of a needle tool works well) shape the metal into a cylinder open on both ends. Fix with super glue.
2. Using a straw cut a round bottom out of Fimo for the pot and gently work it into the cylinder’s bottom part. Bake in the oven for about five minutes on 130 degree.
3. Make a thin stripe out of Fimo and pre-bake. Now cut it to shape and fashion a rim for the pot out of it. Wrap the rim around the upper part of the cylinder and the pot is already taking shape.
4. Use single strands of copper wire to depict the suspension rings and the wire they are attached to going  around the pot under the rim. This is fiddly work and requires some patience. It works best if you have a long strand of wire and make two loops in it. Then wrap it around the pot. You only have to make sure that the loops are opposite each other in the end.
5. Finally add the handle using two intertwined strands of copper wire. This also gives the handle some texture, which looks like simple decorations in this scale.
6. Now paint the entire situla brown, followed by different shades of bronze. You can also use a brown wash to add shadows.
7. Using some black pigment add a bit of sud to the bottom of the pot.
8. Mix acrylic gel gloss, beige acrylic paint and fine white sand to a paste and apply to the pot. This is our wheat pulp. After this is dry you might want to add more of it to give it volume. You can also slightly drybrush it and add a coat of gloss varnish to give it a wet appearance.
9. All there is to do now is to make a rope out of copper wire to fasten the pot to the tripod. Again, better paint the wire before you fasten it.
10. Now glue the tripod in place on the base. Make sure the pot is centred over the fireplace.

Roasted fish:

1. To finish the fish we just need to highlight it a bit with thinned down brown-greys and apply a last brown wash over it, picking out again the fin and some of the details after this treatment.

Veteran pulp eater:

A face only a mother can love….

The veteran is a conversion based on a Corvus Belli elephant mahout.

1. Snip off the rod with a hook he has in his right hand and drill a hole in his fist. Don’t drill it all through, as we won’t need the spoon to protrude on the other side.
2. Using some pincers gently repose the miniature. Be careful as I managed to break his arm off. You only need to reposition the right arm and his fist. The legs might need some adjustment, depending where you want to seat him. I decided to put him on the edge of the pile of fire wood and made his feet touch the ground, while his upper body remains straight.
3. The spoon is quite easy to sculpt: Roll out some Fimo and cut a thin rectangular piece out. Use a ball tool to intend one side forming one end of the spoon. With a needle tool slightly round off the edges on the handle. Bake and you are done.
4. Glue the spoon in place.
5. Paint the spoon in a colour resembling bone or metal. Highlight and finally add some “wheat pulp” paste. Drybrush the paste slightly and add some gloss varnish.
6. Cut out a round piece of Fimo and use a ball tool to form a bowl shape. Bake and fill with “wheat pulp” paste. Glue in place on the Veteran’s lap.

 

Numidian and Iberian dice players:

These two chaps are converted from yet two other Corvus Belli miniatures. A Spanish Scutati and a Numidian Light Horse rider. Both were selected as they would have closed hands after their weapons are removed, making it easy to imagine they have some dice in their hands.

1. You need to cut off the Iberian’s Falcata and reposition his legs and arms so that it looks like he is kneeling on the ground.
2. Cut off the Numidians spear. Reposition the legs and arms of the Numidian so that it looks like he his lying on the ground sideways. His original pose was not too far off.
3. Paint both miniatures. I used slightly diluted colours to layer the highlights, but did not want to overdo it, as the rest of the environment aimed on a more realistic appearance. It is a good idea to paint the miniatures before glueing them on.

The Numidian’s cloak:

1. The cloak is a fairly simple affair. Prepare a small amount of green stuff and roll it out very flat. Let it cure for around 30 minutes to make it less sticky.
2. Cut out a cloak shape.
3. Apply the greenstuff cloak to the ground where you want it and form folds and creases with a sculpting tool.
4. Put a bit of plastic wrap on the greenstuff and place the Numidian in it, so that he conforms to the coat and the coat to him. Let fully cure.
5. Paint the cloak however you like and place the Numidian.

Dice bag and food bag:

1. Both the dice bag and food bag are made following the same steps as for the cloak. I used a straw to get a nice round shape.
2. If you want to make it more realistic you can add a leather cord around the rim of the pouches. Intend the rim in a regular fashion to depict the holes the cord would run through. Just cut very tiny pieces of copper wire and glue them between every second pair of holes with PVA or acrylic gel.
3. You can also add an end piece with a knot in it. Just form one out of wire and glue in an appropriate place.
4. Paint both the dice bag and the food bag, picking out the leather cord. You can place the dice before you paint it all, but the food is better placed later.

Dice:

1. Cut two very small rectangular pieces out of some metal flash.
2. Glue them in place and apply an off-white base coat.
3. Highlight the dices slightly.
4. Use a brush with a very fine tip (I used a W&N Series Seven Size 1) to paint the eyes in.

Bread and olives:

1.  Sculpt yet another bowl for the olives with brown Fimo.
2. Take very small pieces of some light and dark green Fimo and roll them in your hands so that they resemble the shape of olives.
3. Place the olives in the bowl. Bake for five minutes at 130 degree.
4. When cured you can add some highlights to the brown bowl and cover the olives with gloss varnish to depict oil.
5. Use some off-white Fimo to form a small ball.
6. Use a sculpting tool to shape the ball into a bread. This entails basically to flatten it and add six or more incisions on its top.
7. Use some brown pastels to shade the bread and to give the crust a baked appearance.
8. Bake the bread just like the olive bowl.
9. Glue the bowl and the bread in place.

Here we go! A nice camp element that can be easily extended if you would like to use it instead as a ‘village’ terrain piece. I will add a road section with a servant grinding flour, a guard on duty and beasts of burden later on. I also would like to add a rampart and stakes to depict a fortified camp. Finally a second section with tents and the Gaul painting the shield and some other scenes would add even more character to it and make a medium sized terrain piece for Field of Glory.

I hope you enjoyed this tutorial. If you have some suggestions, comments or would like to add to the historical discussion please feel free to comment below.

References:

Primary sources:

Livy. Books XXVIII-XXX With An English Translation. Cambridge, MA: Harvard University Press, 1949.

Polybius. Histories. Evelyn S. Shuckburgh [Trans.]. London, New York: Bloomington 1962.

---

If you would like a constantly updated, themed PDF terrain building, painting and roleplaying guide consider supporting me on Patreon. There also other choice rewards for supporters.

If you are not keen on Patreon, but  enjoy my content and would like to see me well caffeinated so that I can publish tutorials, reviews and guides more frequently click below and buy me cup of dark, mellow goodness.